Whole House Air Filtration Systems in Lexington

EPT uses an electrostatic charge to polarize airborne particles, causing them to be attracted to and captured by the filter media. This allows ECOairflow filters to trap particles as small as 0.001 microns — including viruses, bacteria, ultrafine smoke, and allergens — far exceeding the performance of standard mechanical filters like HEPA at the ultrafine particle range.

No. All ECOairflow filters are certified to UL 2998 Zero Ozone Verification standards by Intertek (ETL), confirming ozone emissions below 0.0005 ppm (5 ppb). This exceeds the ozone standards set by the FDA, EPA, NIOSH, CARB, and OSHA, making them completely safe for residential and commercial use, including healthcare environments.

ECOairflow offers residential and commercial filters rated MERV 11 (Model 1000), MERV 12 (Model 1500, Dynamo 1"), and MERV 13 (Dynamo 2"). The M-Series Hybrid is available in MERV 13, 14, 15, and 16 configurations. Higher MERV ratings provide greater filtration of fine particles while still maintaining low pressure drop for energy efficiency.

ECOairflow recommends replacing the filter pads every 3 months. Maintenance is simple: open the filter housing, remove the old pads, and drop in new ones. The patented one-piece pad design (Dynamo models) and center-screen design (Model 1000) make servicing quick and straightforward without requiring tools or professional assistance.

Yes. ECOairflow's EPT-based filters are highly effective against wildfire smoke (including black and organic carbon), traffic-related air pollution, pollen, dust, pet dander, and indoor smoke from tobacco, cooking, and fireplaces. The filters capture ultrafine particles at 0.001 microns — well below the size range of most allergens and smoke particles.

Yes. ECOairflow's ultra-low pressure drop design reduces heating and cooling costs by up to 15% annually by protecting HVAC equipment from stress and allowing air to flow more freely. The filters themselves consume just 2 watts of power, operating on standard 24V HVAC power, making them one of the most energy-efficient filtration options available.

The Dynamo™ 2" E.A.C. is specifically designed for commercial and geothermal applications, carrying a MERV 13 rating with UL 2998 zero-ozone certification and compliance with LEED, WELL, and Passivehaus standards. The M-Series™ 2" Hybrid E.A.C., rated MERV 13–16, is also ideal for healthcare environments and other demanding applications, maintaining full rated performance whether powered or unpowered.