Whole House Air Filtration in Los Alamitos, CA

For most Los Alamitos residences, a MERV 11 or MERV 12 filter (such as the Model 1000 or Model 1500) provides excellent allergen and fine particle control. Homes near traffic corridors or affected by wildfire smoke may benefit from the Dynamo™ 1″ E.A.C. at MERV 12. Higher MERV ratings (13–16) are typically reserved for commercial or healthcare environments.

Yes, all ECOairflow electronic air filters are certified to UL 2998 zero-ozone verification standards by Intertek (ETL), confirming ozone emissions below 0.0005 ppm — well below limits set by the EPA, CARB, FDA, NIOSH, and OSHA. They are safe for residential use, including homes with children, pets, and individuals with respiratory sensitivities.

Yes. ECOairflow filters are specifically designed to capture wildfire smoke particulates (black carbon, organic carbon) and traffic-related air pollution (TRAP), including non-exhaust automotive particulates and heavy metals. The Electronic Polarization Technology traps these ultrafine particles — often smaller than 0.1 microns — which pass through conventional MERV-rated filters, making them ideal for Southern California air quality conditions.

ECOairflow recommends replacing filter pads every 3 months for optimal performance. Maintenance is straightforward: open the filter housing, remove the old pad, and drop in a new one. No tools or technical expertise are required. The low-maintenance design reduces ongoing service costs compared to traditional pleated filters, which may need more frequent replacement.

No — in fact, the opposite is true. ECOairflow filters are engineered with an exceptionally low pressure drop of as little as 0.11 in.w.c. at 300 FPM, which reduces strain on HVAC blowers and can lower heating and cooling costs by up to 15% annually. Unlike dense pleated filters that restrict airflow, ECOairflow's design maintains strong airflow while delivering superior filtration performance, and the units consume only 2 watts of power.

Yes. ECOairflow filters are available in all industry-standard sizes plus custom sizes, and operate on a standard 24-volt HVAC signal (18–30V range). They are installed by qualified HVAC contractors and are compatible with virtually all residential forced-air systems. Both 1-inch and 2-inch configurations are available to fit common filter slots, with tandem configurations available for commercial applications.

ECOairflow offers five main products suited to Los Alamitos homes and businesses: the Model 1000 (residential, MERV 11), the Model 1500 (residential, MERV 12, captures particles to 0.007 microns and saves up to 15% in HVAC costs), the Dynamo™ 1″ E.A.C. (MERV 12, ideal for homes near traffic or wildfire-prone areas), the Dynamo™ 2″ E.A.C. (MERV 13, suited for commercial and geothermal systems), and the M-Series™ 2″ Hybrid E.A.C. (MERV 13–16, maintains full rated performance whether powered or unpowered).